Trumony Aluminum Limited
Trumony Aluminum Limited Trust And Harmony,Your Best Choice Of Chinese Aluminum Products Supplier
Add to Cart
Electric Racing Vehicle Micro Channel Heat Exchanger Cooling System Cooling Ribbon
Provide micro-channel flat tubes match for battery pack space by extrusion and drawing technology.
Design flow channels according to strength and heat transfer requirements.
Single or multiple flat tubes are welded to the header (manifold), and the water inlet and outlet are respectively diverted through the header (manifold).
The inlet is processed by CNC. Suitable for bottom and side heat exchange of prismatic batteries
We specilized in:
1) Stamped type cooling plate for prismatic cells / battery pack.
2) Snake tube for cylindrical cells, such as 21700, 18650, 3270, 4680 big cell.
3) Microchannel tube with manifold for battery pack / rectangular cells.
4) Roll bond cooling plate
5) Machined cold plate
Our Advantages:
1. Experience integrating manifolds, tubing and interface thermal materials
2. Experience in the design and manufacture of large size plates
3. Simulation aids flow channel design for pressure drop, flow and heat distribution
4. High corrosion resistance and low conductivity material for battery cooling applications
5. Flexible design solutions for all kinds of battery pack.
Test Ability:
| Chemical Composition Test | YES |
| Pysical Test & Optics Test | YES |
| Roughness Test & Hardness Test | YES |
| Elongation Test | YES |
| Salt Spray Test | YES |
| Burst Test | YES |
| Nitrogen & Helium Test | YES |
| Flow Resistance Test | YES. Inside &outside corrosion test |
| Voltage Test | YES |
| Under Water Test | YES. Check the leakage for welding |
Chemical composition
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | V | Ti |
| 1050 | ≤0.25 | ≤0.40 | ≤0.05 | ≤0.05 | ≤0.05 | --- | ≤0.05 | ≤0.05 | ≤0.03 |
| 1100 | ≤0.95(Si+Fe) | 0.05~0.20 | ≤0.05 | -- | -- | ≤0.10 | --- | --- | |
| 3102 | ≤0.40 | ≤0.70 | ≤0.1 | 0.05~0.4 | --- | --- | ≤0.3 | --- | ≤0.10 |
It can be customized according to customers' request!
Mechanical Properties
| Alloy | Temper | Tensile Strength | Yeild Strength | Elongation |
| 1050 | O/F/H111/H112 | ≥65MPa | ≥200MPa | ≥25% |
| 1100 | O/F/H111/H112 | ≥75MPa | ≥200MPa | ≥25% |
| 3102 | O/F/H111/H112 | ≥75MPa | ≥200MPa | ≥25% |
| 3003 | O/F/H111/H112 | ≥75MPa | ≥200MPa | ≥25% |
FAQ:
Q: Are you a trading company or manufacturer?
A: Yes,we are a factory with more than 10 years history in this industry.
Q: What method of processing technology?
A: We have brazing line, stamping line, extrusion line, and roll boned process line. Also CNC centre is available.
Q: If we don't have design, can you assist in design?
A: Yes, we can! We have a strong and experienced design team. Flow path design, thermal simulation, mechanical simulation and design optimation are support. Kindly share with us your detail project, service8@trumony.com, we'd love to do DFM for you.
Q: How fast you can make prototype?
A: About 3~5wks. The precise lead time will depends on your design and producing process