Trumony Aluminum Limited
Trumony Aluminum Limited Trust And Harmony,Your Best Choice Of Chinese Aluminum Products Supplier
Add to Cart
Structural Extruded Aluminum Tube Parallel flow aluminum flat tube
The product has strong Promotion potential. Micro-channel heat exchanger technology has the potential to be promoted to air-energy water heaters in the field of air-conditioning manufacturing, which can greatly enhance the competitiveness of products and the ability of sustainable development of enterprises.Compared with conventional heat exchangers, micro-channel heat exchangers are not only small in size, large in heat transfer coefficient, high in heat exchange efficiency, which can meet higher energy efficiency standards, but also have excellent pressure resistance. CO2 can be used as a working fluid for refrigeration. Environmental protection requirements have attracted widespread attention from academic and industrial circles at home and abroad. At present, the key technology of microchannel heat exchanger-the production method of microchannel parallel flow tube has gradually matured in China, which makes the large-scale use of microchannel heat exchanger possible. We provide Aluminum Embossed Sheet, Aluminum Extrusion Sheet, Aluminum Micro channel Tube, Aluminum High Frequency Welding Pipe, Aluminum heat Pipe and so on.
Company Introduction:
Trumony Aluminum Co.LTD build from 2006, have export over 53 countries of worldwide. Our main products are aluminum alloy cladding material, core material and other aluminum products like Aluminum Coil, Aluminum Foil, Aluminum Strip, aluminum radiator tube for vehicle, Aluminum Pipe, Aluminum Tube , flat aluminum micro channel tube etc, for automobile heat exchangers area such as radiator, intercooler, condenser, evaporator and industrial heat exchangers, like electricity power radiator, air conditioner etc.There are complete sets of modern production and testing equipment operation workshops for casting, Hot rolling , cold rolling, finishing and advanced check-out for researching and testing,such as WDW-3010- micro-controlled electronic universal testing machine,CALS-2000 aluminum alloy metallographic image analysis system etc.
1. Application:
2) 3000 series:3102, 3003
3) 4000 series: 4043 etc
| No. | Alloy | Temper | Tensile Strength(Mpa) | Yield Strength(Mpa) | Elogation(%) |
| 1 | 1050 | O/F/H111/H112 | ≥ 65 | ≥ 20 | ≥ 25 |
| 2 | 1100 | O/F/H111/H112 | ≥ 75 | ≥ 20 | ≥ 25 |
| 3 | 1197 | O/F/H111/H112 | ≥ 80 | ≥ 25 | ≥ 20 |
| 4 | 3102 | O/F/H111/H112 | ≥ 75 | ≥ 20 | ≥ 25 |
| 5 | 3R03 | O/F/H111/H112 | ≥ 80 | ≥ 25 | ≥ 20 |
5. Chemical Composition
| No. | Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | V | Ti |
| 1 | 1050 | ≤ 0.25 | ≤ 0.40 | ≤ 0.05 | ≤ 0.05 | ≤ 0.05 | - | ≤ 0.05 | ≤ 0.05 | ≤ 0.03 |
| 2 | 1100 | ≤ 0.95(Fe+Si) | 0.05-0.20 | ≤ 0.05 | - | - | ≤ 0.10 | - | - | |
| 3 | 1197 | ≤ 0.15 | ≤ 0.20 | 0.40-0.55 | 0.10-0.20 | ≤ 0.03 | ≤ 0.05 | ≤ 0.05 | ≤ 0.05 | ≤ 0.05 |
| 4 | 3102 | ≤ 0.40 | ≤ 0.70 | ≤ 0.10 | 0.05-0.40 | - | - | ≤ 0.30 | - | ≤ 0.10 |
| 5 | 3R03 | ≤ 0.15 | ≤ 0.15 | ≤ 0.01 | 0.90-1.10 | ≤ 0.03 | ≤ 0.03 | ≤ 0.05 | ≤ 0.05 | ≤ 0.05 |
6. Size Tolerance
| Width | Thickness | Wall Thickness | Length | Lateral Curvature | Frontal Curvature | Twsiting Dgree |
| ± 0.05mm | ± 0.03mm | ± 0.05mm | ± 0.03mm | ≤ L× 0.2% | ≤ L× 0.25% | ≤ L× 0.15% |
7. Our products will be tested in strict standard before delivery, some data for your reference.
| No | Products' Testing Name | Contents and requests |
| 1 | Corrosion Resistance | Salt spray test: ≥ 750 hours |
| 2 | Zn Coating Standards | 6/8/10/13± 2g/square meter |
| 3 | Flux Cotaing Standards | 10-15± 2g/square meter |
8. Commercial terms
| Minimum Order Quantity: | 100pcs, less quantity can negotiate |
| Price: | negotiation |
| Payment Terms: | T/T or LC |
| Supply Ability: | 1000,000 pcs per year |
| Delivery Time: | 15-30 working days after received your down payment |
| Packaging Details: | Standard export packaging |
