Trumony Aluminum Limited
Trumony Aluminum Limited Trust And Harmony,Your Best Choice Of Chinese Aluminum Products Supplier
Add to Cart
Large Width Aluminium Alloy Sheet 5083 5754 5154 5454 for Oil Tank
1. Product description:
Aluminum 5xxx series alloy(5083 5754 5154 5454) has high corrosion resistance and good forming property.
Temper:H321/H111/H32/H22
2. Application:decoration,automobile,oil tank,marine service etc.
3. Our advantage:We could supply the aluminum plate width above 2000mm.
4. Package:Export wooden pallets or wooden case with seaworthy packing or as customer 's requirements.
5. Chemical composition:
| ALLOY NO. | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | OTHER | AL |
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | 0.05 | 0.03 | 0.03 | ≥99.5 | |
| 1060 | 0.25 | 0.35 | 0,05 | 0.03 | 0.03 | 0.05 | 0.03 | 0.03 | ≥99.6 | |
| 1070 | 0.2 | 0.25 | 0.04 | 0.03 | 0.03 | 0.04 | 0.03 | 0.02 | ≥99.7 | |
| 1100 | 0.95(Si+Fe) | 0.05-0.20 | 0.05 | 0.1 | 0.05 | ≥99 | ||||
| 3003 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | 0.1 | 0.05 | Remainder | |||
| 3004 | 0.3 | 0.7 | 0.25 | 1.0-1.5 | 0.8-1.3 | 0.25 | 0.05 | Remainder | ||
| 3005 | 0.6 | 0.7 | 0.3 | 1.0-1.5 | 0.2-0.6 | 0.1 | 0.25 | 0.1 | 0.05 | Remainder |
| 3104 | 0.6 | 0.8 | 0.05-0.25 | 0.8-1.4 | 0.8-1.3 | 0.25 | 0.1 | 0.05 | Remainder | |
| 4047 | 11.0-13.0 | 0.8 | 0.3 | 0.15 | 0.1 | 0.2 | Remainder | |||
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | 0.1 | Remainder | ||
| 5252 | 0.08 | 0.1 | 0.1 | 0.1 | 2.2-2.8 | 0.05 | Remainder | |||
| 5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6-3.6 | 0.3 | 0.2 | 0.15 | Remainder | |
| 5083 | 0.4 | 0.4 | 0.1 | 0.4-1.0 | 4.0-4.9 | 0.05-0.25 | 0.25 | 0.15 | Remainder | |
| 5182 | 0.2 | 0.35 | 0.15 | 0.2-0.5 | 4.0-5.0 | 0.1 | 0.25 | 0.1 | ||
| 6061 | 0.4-0,8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | 0.25 | 0.15 | Remainder | |
| 6063 | 0.2-0.6 | 0.35 | 0.1 | 0.1 | 0.45-0.9 | 0.1 | 0.1 | 0.1 | Remainder | |
| 6082 | 0.7-1.3 | 0.5 | 0.1 | 0.4-1.0 | 0.6-1.2 | 0.25 | 0.2 | 0.15 | Remainder | |
| 7075 | 0.4 | 0.5 | 1.2-2.0 | 0.3 | 2.1-2.9 | 0.18-0.28 | 5.1-6.1 | 0.2 | Remainder | |
6. Technical parameter
| Typical alloy: | 5182 |
| Temper: | H111,H112,H114,H116,H321 O,H12,H14 |
| Thickness(mm): | 0.15-600mm |
| Width(mm): | 20-2650mm |
| Length(mm): | 500-16000mm |
| Application: | The outer plate, deck, refrigeration device, tanker, oxygen Generator tower body of the ship's side ship Bottom |
7.Application in the market:
5182 Aluminum Alloy Plate is mainly used for low-load parts that require high plasticity and good weldability, working in liquid or gaseous media, such as fuel tanks, gasoline or lubricant catheters, various liquid containers and other small load parts made with deep pull: wire is used to make rivets. Thin plate can be used to process canister cover, car body plate, control plate, reinforcement parts, bracket and other parts.
